[root] Triangle Away APK Free Download (Android APP)

Description of [root] Triangle Away

[root] Triangle Away Apk – On This Page available to Free download [root] Triangle Away Apk File. This is Original [root] Triangle Away APK File. We are Share this Apk file Free to download in Our direct Download page. download [root] Triangle Away APK find latest version Here.  [root] Triangle Away Apk File requires . So, App Install 100,000+ and  Get Latest app  Updated Here.

We are always share apk files on getapkfile.com. Free download [root] Triangle Away APK file for your android devices. Also Don’t worry 100% safe and works. 

How To Install APK File on your Android Device

»You can also install [root] Triangle Away APK files from the browser on your Android smartphone or tablet.

» Get the [root] Triangle Away APK file you want to download, and tap it (you should then be able to see it downloading on the top bar of your Android device).

» Once it’s download Complete, open Downloads, tap on the [root] Triangle Away APK file, and tap Yes when prompted.

» The [root] Triangle Away app will begin installing on your device.

#Read Me

Before you can install it on your phone you will need to make sure that third-party apps are allowed on your device. Go to Menu > Settings > Security > and check Unknown Sources to allow your phone to install apps from sources other than the Google Play Store.

Below Include Full Information about the [root] Triangle Away App.

NOTICE: CHECK DEVICE COMPATIBILITY IN THE LIST BELOW BEFORE INSTALLING. NOT SURE? TRY THE FREE VERSION!

Many Samsung devices store a flash counter that keeps track of how many times you have flashed *custom* firmwares to your device. On some devices, a yellow triangle or other sort of visual warning is also displayed during boot if you are running a *custom* firmware. TriangleAway was built to disable the triangle (if a visual warning is present) and reset the custom ROM flash counter to 0. This app requires root !

You can find out the current status of your flash counter and firmware state (custom or official) by booting into “download mode” on most devices. The usual way of getting into “download mode” is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the “adb reboot download” command also often works.

When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to “Reset flash counter”. Please confirm that the information shown is correct before resetting the values.

On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select “Reset flash counter”. The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing). On some devices this will actually trigger the counter to 1 if its 0 – so if you’re “just checking”, do that in download mode!

!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE !!!
( and by brick I mean brick – only a board replacement or a JTAG unit will be able to save you, don’t mess with boot(loader) stuff unless you *really* mean it! )

Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.

Note#2: on new devices status can only be reset on stock firmwares!

Supported devices:

SG S2:
– GT-I9100 **
– Sprint Epic 4G Touch
– SHW-M250K/L/S

SG S3:
– GT-I9300/I9300T **
– GT-I9305/I9305T/I9305N LTE **
– USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC, MetroPCS, Cricket, CSpire
– Canada
– SHV-E210K/L/S, SHW-M440S

SG S4:
– GT-I9505
– USA: AT&T, VZW, Sprint, T-Mo, USCC
– Canada

SG Note:
– GT-N7000
– GT-I9220

SG Note 2:
– GT-N7100/N7100T/N7102/N7105/N7105T **
– USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC
– Canada: I317M, T889V
– SHV-E250K/L/S **

SG Note 3 (4.4+):
– GT-N9005
– USA: T-Mobile, Sprint
– Canada: SM-N900W8
– Asia: SM-N900S/2/6/8/9

SG Note 8.0″:
– GT-N5100 3G **
– GT-N511x Wi-Fi **
– GT-N5120 LTE **

SG Note 10.1″:
– GT-N8000 3G **
– GT-N801x Wi-Fi **
– GT-N8020 LTE **
– SHW-M480S/K/W **

SG Camera EK-GC100 **

SG Tab 2:
– GT-P310x 7″ 3G
– GT-P311x 7″ Wi-Fi
– GT-P510x 10.1″ 3G
– GT-P511x 10.1″ Wi-Fi

Various:
– I8160, I8190
– I9070/P
– I9082
– I9260
– S7500, S7560, S7562

** Various models are supported depending on firmware, but only the exact models listed are supported regardless of firmware version.

If Triangle Away works may depend on your kernel, try flashing a different one.

Note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 – make sure to check the counter in download mode!

For discussion and technical details, see the XDA-Developers.com thread here:

http://forum.xda-developers.com/showthread.php?t=1494114

This download is also available completely for free from that thread. You can go there and download it for free, or buy me a beer and download it from Play. It is the same program.

Notice about future updates – http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/
v3.26
– Fixed: on some devices nothing happened when you pressed “reset flash counter”. Oops 🙂

v3.25
– Updated support for the SGS4 Qualcomm family: Android 4.4.2
– Added support for the Note3 Qualcomm family on Android 4.4.2 (only)
— Note3 QC INTL GT-N9005
— Note3 QC T-Mobile SM-N900T (untested)
— Note3 QC Sprint SM-N900P (untested)
— Note3 QC Canadia SM-N900W8 (untested)
— Note3 QC Asia SM-N900S/2/6/8/9 (untested)